Time Release Concrete Remover / Converter
Turns Hardened Concrete Into ‘Sand’ for Easy Removal
Corrosion Technologies wrote the book when it comes to controlling rust and corrosion. We have taken that same leading edge approach and applied it not only to the removal of rust, but to other industrial applications such as the removal of dried concrete.
Apply Sand Blast, and in about 15 minutes concrete is converted into a sand-like mushy substance that is safe and easy to remove from Ready Mix trucks and concrete equipment. This revolutionary product contains no harsh acids and does not give off fumes. Unlike traditional acid-based concrete removers, Sand Blast will not harm paint, rubber or plastic and it will not cause metal to rust. This is the safest and gentlest concrete remover in the industry. Safe on aluminum.
Speed: slow | Removes: 1/8″ | Safe: safe
Dilute: SAND BLAST can be used full strength or diluted as much as 4:1 with water depending on the thickness of the concrete to be removed and the amount of time SAND BLAST can work before the vehicle or equipment must be returned to service.
Spray or Brush On: Apply SAND BLAST liberally to any residual dried concrete left on vehicles, forms and equipment. Let the product sit for at least 15 minute – or longer in the case of thicker deposits. Product can be left on overnight to minimize cleanup effort. If left on overnight, re-wet surface with SAND BLAST prior to rinsing, brushing, etc.
Rinse, Brush or Wipe Off: Once concrete has been transformed into sand, it can easily be removed by rinsing with water, pressure washing, brushing, or wiping off with a rag or towel.
Download Product Documents