Corrosion X is the only product available to the public that meets the US Navy’s tough new corrosion prevention and control performance requirement ( MIL-PRF-81309G ).
Corrosion Protection and Rust Preventive Coating
Due to Polar Bonding, CorrosionX causes common metals and metal alloys such as iron, steel, stainless steel, aluminum, copper, brass, bronze, etc. to chemically behave more like noble metals such as gold and platinum. In other words, as long as CorrosionX is present on metal, it can’t rust or corrode! CorrosionX also has a dielectric characteristic, so it’s safe on electronics and completely shuts down electrolysis between dissimilar metals.
Use CorrosionX wherever you want corrosion control without paint or wax coatings. A light spray of CorrosionX on power heads, generators sets and engines a couple of times a year will keeping them looking like new – even in saltwater and coastal environments.
A Breakthrough Lubricant
CorrosionX’s unique formulation offers a multitude of advantages over conventional spray lubricants. Because it sticks to metal like a magnet, it cannot be easily displaced by pressure, friction or moisture. It lubricates under extreme loads and high temperatures.
Not only does CorrosionX lubricate better, it lasts many times longer! This is especially true in outdoor, coastal and marine environments where direct exposure to rain and sea spray will quickly displace ordinary lubricants.
Use CorrosionX on sheaves, hinges, locks, cable/wire rope, windlasses or any metal part needing lubrication. It is ideal for fishing reels and guns.
CorrosionX also penetrates faster and further than anything you’ve ever used. Corroded or rusted nuts, bolts or fittings can usually be disassembled within a few minutes. Even items you believe to be hopelessly seized can usually be saved and returned to service.
Watch this time lapse video closely! Due to it’s unique Polar Bonding characteristic, CorrosionX is such an incredible penetrant that it will defy gravity and climb straight up this 3″ bolt!!
Safe On Electronics
Water and electronics don’t mix. Until now, there haven’t been many options for protecting or restoring electronics from moisture intrusion. CorrosionX’s unique Polar Bonding Fluid Thin Film Coating (FTFC) technology displaces moisture and seals it out with a self-healing high dielectric coating. Even though the CorrosionX has a dielectric property in excess of 39,000 volts, because it forms an ultra-thin film it does not interfere with electronics or heat dissipation. A must for all marine battery terminals, and a mission critical product for drones and all Remote Control hobbyists.
Minimal Environmental Impact Product
The volatile organic content (usually abbreviated as VOC or VOCs) of CorrosionX is now ZERO. Compare that to most products in the spray lubricant category, which can be 50% or more VOC (for example, according to their current Safety Data Sheet, WD-40 is 49.5% solvent). That means CorrosionX is many times more gentle on you, your equipment and the environment.
Download Product Documents