pipe-insulation-2_new

ChemLine® LE

chemline
A Protective Lining for Superior Corrosion and High Temperature Resistance with Exceptional Flexibility and Toughness.

ChemLine® LE coating is specially formulated polymer resin for handling the high temperature and abrasion requirements of the power industry. ChemLine® LE is a two-component force cure system that offers unique characteristics. ChemLine® LE is a cross-linked organicinorganic multifunctional polymer coating that is cured though homopolymerization. This dense crosslinked polymer exhibits high flexibility and toughness, having no detrimental hydroxyl or ester groups. Due to ChemLine® LE’s temperature resistance of 500°F (260°C), it provides superior resistance.

  • Acids, alkalies, solvents, oxidizing agents
  • Good wear and abrasion resistance
  • Impact resistance
  • Thermal cycling -40°F (-40°C) to 500°F (260°C)
Category:

Product Description

Industry Applications

  • Stacks
  • Chimneys
  • Ducts
  • Flue gas desulfurization scrubbers
  • Chemical scrubbers
  • Pre-scrubbers
  • Spray towers
  • Fans

Application Highlights

  • Excellent resistance to hot flue gas condensate
  • Resists fly ash abrasion
  • Low coefficient of thermal expansion
  • Smooth, low surface energy reduces fly ash buildup in ducts and stacks
  • Applied to pitted corroded steel
  • Very low VOC – 99 grams/L (0.80 lbs.per gallon)
  • Outstanding flexibility
  • Resists hydroblasting
  • Field repairable
  • Coefficient of thermal expansion comparable to stainless steel
  • Dry heat resistance up to 500°F (260°C)

Typical Properties

Stock Colors Gray, Red
V.O.C. Level/Gal. 99 grams/L (0.80 lbs./gal.)
Lead Content Zero
Chromate Content Zero
Pot Life 120 minutes @ 75°F (24°C)
Viscosity Reduction Reduce with Toluene or Xylene
Solids by Volume 90.0%
Recommended Film Thickness (dry) mils average
  Steel: 16 mils (400 microns)
  Concrete: 24 mils (600 microns)
Shelf Life 12 months

For product recommendations and technical, application and heat curing information contact Advanced Polymer Coatings’
customer service.
Contact +01 440-937-6218.

Typical FGD Schematic (non-denominational) Showing Various Lining Zones for ChemLine® LE

Explaination of Above Codes Used to Define Living Environment

Download Product Documents