untitled-2

ChemLine® 2400/32

chemline_2400-32
A Protective Lining for Abrasion Resistant Service at Higher Temperatures.
ChemLine® 2400/32 is an abrasion resistant two component ambient or low temperature force cured polymer lining system. ChemLine® 2400/32 is a tough, flexible lining designed to handle the abrasiveness of coal, ore, plastic pellets, slurries and other media.ChemLine® 2400/32 has excellent chemical resistance capable of withstanding the corrosive attack that normally comes with media handled.

Industry Applications

  • Hopper cars
  • Slurry pipe
  • Legs of oil platforms
  • Pumps
  • Coal chutes
  • Bag houses
  • Ion exchange vessels
Category:

Product Description

Chemical Resistance

Sulfuric acid to 98%, most solvents including methylene chloride, MEK, methanol, gasohol, distilled water, inorganic acids, dilute organic acids and alkalis. Ideal for corrosive vapor environments.

Application Highlights

  • Can be applied to pitted and corroded steel surfaces
  • Very high abrasion resistance
  • Ambient cure
  • Low VOC – 99 grams/L (0.80 lbs.per gallon)
  • Excellent adhesion
  • Good flexibility and toughness
  • Field repairable
  • Steam cleanable
  • Complies with all FDA regulations
  • Resists hydroblasting
  • Dry heat resistance up to 400°F (204°C)

Abrasion Resistance

Typical Properties

Stock Colors Gray
V.O.C. Level/Gal. 99 grams/L (0.80 lbs./gal.)
Lead Content Zero
Chromate Content Zero
Pot Life 30 minutes @ 75°F (24°C)
Viscosity Reduction Reduce with Toluene or Xylene
Solids by Volume 91.0%
Recommended Film Thickness (dry) mils average
  Steel: 16 mils (400 microns)
  Concrete: 24 mils (600 microns)
Shelf Life 12 months

For product recommendations and technical, application and heat curing information contact Advanced Polymer Coatings’
customer service. Contact +01 440-937-6218.

Superior Corrosion and Erosion Resistance Performance

This is Only A Reference Guide
This is an abbreviated listing of the more than 5,000 chemicals that have been tested. This information is intended to serve as a reference guide only. The end user is responsible for determining if ChemLine® is the appropriate coating for the specific application involved. Contact your ChemLine® Representative or the ChemLine® Customer Service Hotline +01 440-937-6218 for detailed specifications prior to any final coatings recommendation or application.

A = Good at ambient temperatures L = Limited Service N = Not recommended — = No information

Download Product Documents