A Commitment to Safety
Advanced Polymer Coatings is dedicated to providing high quality polymer coating products for industrial applications. The same concern and pride that we exercise in our manufacturing should also be extended to the “human element” of the coating operation – namely the application of APC’s coatings to various surfaces.
Advanced Polymer Coatings believes in fully protecting the people who apply these coatings. We strongly recommend closely following the procedures shown in this safety brochure, including the use of personal protective equipment (PPE). This will help to ensure the safety of these individuals. Please contact our application engineers for any additional questions you may have regarding the application and safety procedures for our coatings.
1 Put on full body Saranex1 suit.
Note: Remove hood portion of suit, as this is not required.
2. Put on air hose belt for air hood2 over Saranex suit to fit.
3 Insert air hose into air hood cape2.
4 Put on air hood cape2 and tape cape to shirt to prevent from sliding up.
5 Connect purified air line to hood supply line.
Note: Hood supply line must be supplied with vortex cooling assembly – adjust as required.
6 Complete dressing by putting Saranex suit over air hood cape.
7. Put solvent resistant gloves3 on over Saranex suit. Seal gloves to suit by taping glove to suit.
8. Zipper and seal suit.
9 Fully suited with air being supplied across head, down face into suit increasing worker comfort and safety.
Suit is fully pressurized in preventing any outside contamination from entering.
Note: Additional plastic boots are recommended to cover Saranex boots when entering tank to keep surface from getting contaminated.
1 – Saranex® Coverall (Lab Safety Supply)
2 – 3M Breathe-Easy 10 Air Supplied Hood and Cape (Lab Safety Supply)
3 – Silver Shield Protective Gloves (Lab Safety Supply)
for Handling MarineLine®, ChemLine ®, and GuardLine® Coatings.
Note: These products can cause skin irritation.
Use the following procedures while handling these products:
1. Ventilate tank at all times when spraying.
2. Apply skin lotion containing lanolin to hands, arms, and face prior to working with coating.
3. Wear protective clothing.
A. When mixing, prepping or repairing, wear rubber gloves, protective overalls, chemical goggles, and gas/vapor purifying respirator.
B. When spraying, wear rubber gloves, protective overalls, plastic boots, protective hood and full face positive air pressure mask. Tape closed all openings.
Important: Do not wash skin with solvent to clean coating off. Use soap and water only! Reapply skin lotion after washing.
If you irritate skin (reddening), use Cortizone cream or Beta-Val cream (Betamethasone Valerate 0.1%). Keep away from solvents until healed.
© 2014 0923
The furnishing of the information contained herein does not constitute a representation by Fedcom Coatings (FC) that any product or process is free from patent infringement claims of any third party, nor does it constitute the grant of a license under any patent of FC or any third party. FC assumes no liability for any infringement which may arise out of the use of the product. FC warrants that its products meet the specifications which it set for them. FC DISCLAIMS ALL OTHER WARRANTIES relating to the products and DISCLAIMS ALL WARRANTIES RELATING TO THEIR APPLICATION expressed or implied INCLUDING but not limited to warranties of MERCHANTABILITY AND FITNESS for the particular purpose. Receipt of products from FC constitutes acceptance of the terms of the Warranty; contrary provisions of purchase orders not with standing. In the event that FC finds that products delivered are off-specification, APC will at its sole discretion, either replace the products or refund the purchase price thereof. FC’s choice of one of these remedies shall be Buyer’s sole remedy. FC will under no circumstances be libeled upon for consequential damages except in so far as liability is mandated by law. FC will deliver products at agreed upon times in so far as it is reasonably able to do so, but FC shall not be liable for failure to deliver on time when the failure is beyond its reasonable control. For the most current version of this literature, visit www.fedcom.ae